how long have bosco and myolie been dating Mdt optimize the boot image updating process

Update Star has been tested to meet all of the technical requirements to be compatible with Windows 10, 8.1, Windows 8, Windows 7, Windows Vista, Windows Server 2003, 2008, and Windows XP, 32 bit and 64 bit editions.

1) Download the custom ROM, copy to the external SD card root directory.

It will open on Recovery, choose update from SD card 7. There are 3 models of S5 Logo booting, for example, if you want the booting logo of the G9006V booting logo, just simply transfer/send the files in G9006V- the XXXYYY folder to your sd card. Turn off your phone, and reinsert the sd card, start it up again, then the boot logo will be changed INSTRUCTIONS “you can also use the instructions below to update via SD Card” Aside from splash tool, this method is also effective for some ROMS.

if you don’t close the back cover or USB cover Note: first boot runs about 2 minutes1.

4) Select Update Recovery (choose ‘xx_xxxx_recovery_xxxxx-xxxx.img) 5) Mobile reboot in CWM and and follow this instructions: – Wipe Data / Factory Reset - Select the ROM 7) Flash complete, restart the phone and have patience, first boot takes a while Using Splash tool to update Firmware 1. Turn off your phone and connect your phone to PC via USB. You should install msxm16, vcredist_x86 and Install Driver in the folder MTK_USB_Driver.

3) Start Mobile Uncle Tools (Download on Goolge play). Choose scatter-loading (MT6589_Android_scatter_emmc.txt) 5. Plug in USB cable to PC, click download button as soon as you plug-in the phone to your PC. Wait until the green circle pops out which means you successfully, if RED, you should reflash again.

2) Download CWM, extract and copy ‘xx_xxxx_recovery_xxxxx-xxxx.img'(CWM recovery) to the root of your SD Card.

The use of MDT without installing it can be achieved in three steps.

You start by creating two folders that will contain respectively, required files for MDT and required files for ADK.

This is the ROM section of the website, feel free to use the FW available here.

You may Write your request as well as your comments and suggestions on the comments section.

See below, what these folders should contain: Note: If you already have a Deployment Share make sure you use the same version of MDT you used to create the deploy contents.